Roland SJ-740 Bedienungsanleitung PDF herunterladen (Seite 91)

Chapter 6 What to Do If...

What to Do If the Printing Carriage Does Not Operate

During operation, if for some reason the printing carriage does not return to the standby position, then following the

procedure, cap the printing heads, and contact the your authorized Roland DG Corp. dealer or service center.

If the printing carriage is allowed to stand for a prolonged period with the printing heads uncapped (that is with the

printing carriage over the platen), the heads may become clogged or even damaged.

Capping the Printing Heads

Make sure the main power is switched off, then

open the cover on the right side of the machine.

Open the front cover and move the printing

carriage to the standby position by hand.

Insert the oval end of the pipe included with the

machine into the hole in the bottom of the ma-

chine, then rotate the pipe.

The cap unit rises.

Align the guides at the two ends of the cap unit

with the guides at the two ends of the printing

carriage.

Turn the pipe more bring the cap unit close to

the printing carriage.

Standby position

Pipe

Printing carriage

Cap unit

6-1 What to Do If...

Guides

Continued on the next page

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 101 102

Keine Kommentare

Roland SJ-740 Bedienungsanleitung Seite 91