Roland SX-8 Bedienungsanleitung PDF herunterladen (Seite 21)

4 Adjustment

4-3 HOW TO UPGRADE FIRMWARE

Remove the Front Table.

It is necessary to prepare the followings to

upgrade the FIRMWARE.

1. Firmware Disk

2. PC with MS-DOS

3. Parallel Cable

Connect the PC and the SX-15/12/8 with the Parallel Cable.

Turn on the DIP SW-3 on the Main Board and connect the

AC adapter.

Open the [download.bat] file in the Firmware Disk.

Some PCs can not use the BAT FILE. Please

refer to the ReadMe File in the Firmware Disk.

STANDBY LED starts blinking slowly when the upgrade is

completed without any problem.

In case of problem, STANDBY LED blinks quickly.

Disconnect the AC adapter and turn off the DIP SW-3 and

then, fix the Front Cover.

Front Table

1 2 3 4

O N D I P

DIPSW

Main Board

Front Table

STANDBY LED

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 34 35

Keine Kommentare

Roland SX-8 Bedienungsanleitung Seite 21