Roland M-480 Bedienungshandbuch PDF herunterladen (Seite 4)

Booting/Quitting and Connection

Booting and Quitting the M-480 Remote

Booting

Turn on the iPad installed with the M-480 Remote and tap the icon below.

g.remote-icon.eps

Quitting

Press the home button of your iPad to quit M-480 Remote.

Connecting with the M-480

Connect with the M-480 using the steps below.

Connect the wireless USB adaptor (separately sold WNA1100-RL) to the M-480 and enable the wireless LAN function. For details of conguring the wireless

USB adaptor connection to the M-480, refer to the “Functionality Added in Ver. 1.6”. This can be download from the Roland website as below.

http://www.rolandsystemsgroup.net/

You cannot connect multiple iPad units simultaneously. Also, it is not possible to use the M-480 RCS (dedicated remote control software) simultaneously.

1. Check the iPad network settings

• If you connect the M-480 via a wireless LAN access point.

Select the wireless LAN access point where the M-480 is connected in [Setting] > [Wi-Fi] of your iPad. For connection of your iPad and wireless LAN access

point, refer to the owner’s manual of the access point or iPad.

• If you connect the M-480 in Ad-Hoc mode.

On iPad, select the Ad-Hoc SSID set on the M-480. You can select it in [Setting] > [Wi-Fi] > [Choose a Network] of your iPad. The password

entry screen appears on your iPad. Enter the Ad-Hoc Key shown on the M-480.

* For details of the network settings of the iPad, refer to the iPad owner’s manual.

2. Open the ONLINE screen

Tap the ONLINE button located at the position below to open the ONLINE screen. When this screen opens, scanning of the available M-480

units will start.

g.online-button.eps

1 2 3 4 5 6 7 8 9 ... 16 17

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland M-480 Bedienungshandbuch Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mixer Roland M-480