Owner’s Manual Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY”(p. 4) and “IMPORTANT NOTES” (p. 6). These section
10Names of Things and What They Dofig.front-panel.eps1. MOUSE Connector (p. 15)This allows connection of a commercially available PS/2 mouse. This e
11Names of Things and What They Dofig.rear-panel1. AC Adapter ConnectorThis is for connecting the included AC adapter.2. MIDI IN and OUT/THRU Conn
12Connecting External EquipmentConnect source devices such as video cameras, players or the outputs from a video mixer to the VIDEO INPUT connectors o
13Connecting External EquipmentConnecting the LVS-800Connect Monitor Outputs or Program/Preview Outputs from the LVS-800 to the VIDEO INPUT connectors
14Connecting External Equipment* To prevent malfunction or damage to video monitors or other devices, always turn off the power on all devices before
15Connecting External EquipmentWhen you’re using the unit as a matrix switcher, connect projectors, recorders, and other such equipment to the MATRIX
16Use As a Multi-ViewerWhen you’re using the MVS-12 as a multi-viewer, you can use any of the following four patterns to display the video on monitors
17Use As a Multi-ViewerPress a [MULTI-OUT] button located on the front panel to choose the display mode.fig.switch-pattern-button.epsYou can also choo
18Use As a Multi-ViewerBy default, the channels are displayed in the corresponding boxes in the succession shown on p. 16. You can use the procedure d
19Use As a Multi-ViewerWhen the input pictures have mixed aspect ratios, you can individually make them letterboxed.1. Choose the display pattern.Use
About the lwIPThis product uses the lwIP for TCP/IP stack of LAN. Be aware of the lwIP copyright here below. Copyright (c) 2001, 2002 Swedish Institut
20Use As a Multi-ViewerYou can save the settings for the current display mode and the display locations to a MEMORY button.1. Make the settings for th
21Use As a Multi-ViewerYou can synchronize operation of the MVS-12 with the LVS-800 and display the channel-selection status on a monitor.1. Connect t
22Use As a Matrix SwitcherYou can use the buttons on the front panel to assign source channels to output destinations [1] through [4].1. Select the ou
23Use As a Matrix SwitcherYou can use the mouse to assign sources to output destinations.1. Display the menu.Right-click with the mouse to display the
24Use As a Matrix SwitcherYou can save the assignments to [1] through [4].1. Finish making the assignments.Finish the operation for assigning sources
25Use As a Matrix SwitcherYou can synchronize the operation of the MVS-12 with the V-1600HD and switch the output.1. Connect the source to the MVS-12.
26Menu Operations and Menu ListUse the [SETUP] buttons or the mouse to make various settings.1. Display the menu.Press the [MENU] button or right-clic
27Menu Operations and Menu ListSYSTEM SETTING Menufig.sys-set-menu.eps*1 The OUTPUT FORMAT setting made automatically by [AUTO] is enabled only for HD
28Menu Operations and Menu ListINPUT ASPECT MenuSelecting this menu item lets you change the aspect ratios of the channels. Refer to “Changing the Asp
29Other FeaturesThe MVS-12 can switch to NTSC or PAL at startup. fig.NTSC-PAL-boot.epsSwitching to NTSC at StartupAt [MATRIX OUT], hold down [1] and t
3Check the included itemsMVS-12 itselffig.MVS-12-itself.epsAC Adaptor and Power Cordfig.PSB1U.epsFerrite Core (two)fig.ferrite-core.epsRubber Foot (fo
30Other FeaturesSwitching from the MenuAt the [SYSTEM SETTING] menu, select the desired output format in the [OUTPUT FORMAT] item. Then, the MVS-12 is
31Other FeaturesBy default, the respective sources are displayed with numbers from [CH1] through [CH12] or [1] through [4], but you can change these t
32Other Features4. Select the channel whose name you want to change.Use the up and down cursor buttons and the [ENTER] button or use the mouse to clic
33Other FeaturesYou can take the values saved to PANEL PRESET buttons 1 through 4 and copy them to other buttons or delete them.Copying Values in Memo
34Other FeaturesResetting Values in Memory1. Display the menu.Press the [MENU] button or right-click with the mouse to display the MAIN MENU.2. Select
35Other FeaturesWhen you’re using the MVS-12 as a matrix switcher, using all 12 inputs might result in delay of output images from your channel switch
36Other FeaturesYou can lock panel operations of MVS-12. Press [MENU] button and [ENTER] button for 2 seconds to lock the panel operations. When panel
37Appendicesfig.specification-E.eps* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change w
38AppendicesA mouse is connected but is unusable.Was the connection made while the power was on?When connecting a mouse, first turn off the power to t
For China
4USING THE UNIT SAFELY002c• Do not open (or modify in any way) the unit or its AC adaptor...
*5100016852-02*
5USING THE UNIT SAFELY015• Do not force the unit’s power-supply cord to share an outlet with an unreasonable number of other devices. Be especially ca
6IMPORTANT NOTESPower Supply301• Do not connect this unit to same electrical outlet that is being used by an electrical appliance that is controlled b
7ContentsAbout Power Supply...8Connecting the AC adaptor...
8About Power SupplyConnect the AC adaptor to MVS-12. Place the AC adaptor so the side with the indicator (see illustration) faces upwards and the side
9About Power Supply* Once the connections have been completed (p. 8), turn on power to your various devices in the order specified. By turning on devi
Kommentare zu diesen Handbüchern